E.D.M wires has been developed using JAPANESE WIRE DRAWING, TECHNOLOGY, DRAWINGS DIES & LUBRICANT. These edm wires are based on integrated processing technology starting from the stage of casting, edm wire drawing & automatic spooling. Our wire is free from paraffin coating.
| Type | Diameter (mm) | Diameter Tolerance | Tensile Strength (N/mm2) | Elongation | Conductivity (IACS) | Color |
|---|---|---|---|---|---|---|
| Hard | 0.30, 0.25, 0.20 | 900 - 1050 | 3% | |||
| Semi Hard | 0.30, 0.25, 0.20 | +0.00/-0.002mm | 650 - 750 | 8% | 21% | Silver |
| Soft | 0.30, 0.25, 0.20 | 440 - 540 | 15% |
| Type | Diameter (mm) | Diameter Tolerance | Tensile Strength (N/mm2) | Elongation | Conductivity (IACS) | Color |
|---|---|---|---|---|---|---|
| Hard | 0.30, 0.25, 0.20 | 900 - 1050 | 3% | |||
| Semi Hard | 0.30, 0.25, 0.20 | +0.00/-0.002mm | 650 - 750 | 8% | 21% | Dark Gold |
| Soft | 0.30, 0.25, 0.20 | 440 - 540 | 20% |
| Type | Diameter (mm) | Diameter Tolerance | Tensile Strength (N/mm2) | Elongation | Conductivity (IACS) | Color |
|---|---|---|---|---|---|---|
| Hard | 0.10, .15, 0.20, 0.25, 0.30 | 900 - 1050 | 3% | |||
| Semi Hard | 0.10, .15, 0.20, 0.25, 0.30 | +0.00/-0.002mm | 650 - 750 | 8% | 21% | Brass |
| Soft | 0.10, .15, 0.20, 0.25, 0.30 | 440 - 540 | 20% |
We will provide a lineup of advanced products in order to satisfy the requirement for various types of electric discharge machine
| Type | Model No. | Diameter | Tolerance | Breaking Point (Kg) | Tensile Strength | |||
|---|---|---|---|---|---|---|---|---|
| Inch | MM | Kg/mm2 | N/MN2 | N/MN2 | ||||
| Hard | M-CUT H-30Hw | 0.012 | 0.30 | +0.000mm- -0.002mm | 6.92-7.36 | 100-115 | 900-1050 | 142.000 - 149.000 |
| Hard | M-CUT H-25Hw | 0.010 | 0.25 | +0.000mm- -0.002mm | 4.81-5.11 | 100-115 | 900-1050 | 142.000 - 149.000 |
| Hard | M-CUT H-20Hw | 0.008 | 0.20 | +0.000mm- -0.002mm | 3.08-3.27 | 100-115 | 900-1050 | 142.000 - 149.000 |
| Hard | M-CUT H-15Hw | 0.006 | 0.15 | +0.000mm- -0.002mm | 1.731-0.817 | 100-115 | 900-1050 | 142.000 - 149.000 |
| Hard | M-CUT H-10Hw | 0.004 | 10 | +0.000mm- -0.002mm | 0.769-0.817 | 100-115 | 900-1050 | 142.000 - 149.000 |
| Semi Hard | M-CUT H-H305w | 0.012 | 0.30 | +0.000 -0.002 | 4.59-5.30 | 70-80 | 650-750 | 637.000 - 735.000 |
| Semi Hard | M-CUT H-H0255w | 0.010 | 0.25 | +0.000 -0.002 | 3.19-3.68 | 70-80 | 650-750 | 637.000 - 735.000 |
| Semi Hard | M-CUT H-H205w | .008 | 0.20 | +0.000 -0.002 | 2.04-2.35 | 70-80 | 650-750 | 637.000 - 735.000 |
| Semi Hard | M-CUT H-H155w | .006 | 0.15 | +0.000 -0.002 | 1.15-1.32 | 70-80 | 650-750 | 637.000 - 735.000 |
| Semi Hard | M-CUT H-H105w | .004 | 0.10 | +0.000 -0.002 | 0.51-0.589 | 70-80 | 650-750 | 637.000 - 735.000 |
| Soft | M-CUT H-30Sw | 0.012 | 0.30 | +0.000mm- -0.002mm | 3.53-3.97 | 50-58 | 440-540 | 722,000 - 82,000 |
| Soft | M-CUT H-25Sw | 0.010 | 0.25 | +0.000mm- -0.002mm | 2.45-2.75 | 50-58 | 440-540 | 722,000 - 82,000 |
| Soft | M-CUT H-20Sw | 0.008 | 0.20 | +0.000mm- -0.002mm | 1.57-1.76 | 50-58 | 440-540 | 722,000 - 82,000 |
| Soft | M-CUT H-15Sw | 0.006 | 0.15 | +0.000mm- -0.002mm | 0.884-0.992 | 50-58 | 440-540 | 722,000 - 82,000 |
| Soft | M-CUT H-10Sw | 0.004 | 0.10 | +0.000mm- -0.002mm | 0.393-0.441 | 50-58 | 440-540 | 722,000 - 82,000 |
| Machine | Spool type | D-1 | D-1 | W | d | Winding Weight (Kg) | Spool Type |
|---|---|---|---|---|---|---|---|
| Japanese Machine | P-1 | 100 | 60 | 90 | 20 | 1.5 | 12 |
| P-3 | 130 | 80 | 110 | 20 | 3 | 6 | |
| P-5 | 160 | 50 | 114 | 20 | 5 | 4 | |
| P-15 | 250 | 110 | 140 | 20 | 3.5 | 4 | |
| European Machine | D-125 | 125 | 80 | 125 | 16 | 3.5 | 4 |
| D-160 | 160 | 10 | 160 | 22 | 7 | 4 | |
| D-200 | 200 | 125 | 200 | 22 | 16 | 4 |
Sector-43, Gurgaon-122001
info@maheshwariwires.comNo. 19-A & B, Mohakmpur Industrial Complex Phase-II, Rithani
+91 - 121 - 2534611 maheshwariwires@ gmail.com© 2015 Maheshwari Wires Private Limited . All rights reserved
Developed and Managed By Konnect2India.com
